An All-New, High-Performance FPV Racer Drone by HappyModel
Introducing the Mobeetle6 Whoop and Toothpick 2-IN-1 drone, engineered with the help of Angry Don FPV, and featuring the advanced DiamondF4 Flight Controller. This ultimate BNF FPV Racer Drone by HappyModel is perfect for hobbyists and professional drone racers alike. Enjoy unparalleled power, efficiency and performance in a lightweight, easy-to-use package.
Lightweight and Versatile Design
The Mobeetle6 is the lightest 1S Whoop and Toothpick 2-IN-1 FPV drone, giving you the best of both worlds. With a wheelbase of 65mm and a weight of just 17.5g without the battery, it offers incredible agility and responsiveness in the air. The package includes the Mobula6 toothpick frame, making it easy for you to convert your drone accordingly.
Powerful and Efficient Performance
Equipped with the DiamondF4 ELRS Flight Controller, it is compatible with both ELRS SPI RX and Frsky SPI RX versions. The onboard 4in1 ESC supports a 1S LiPo/LiPo HV, offering 5A continuous current and peak 6A current for 3 seconds. With the EFM8BB21 MCU, the drone delivers high-definition image and video quality, along with an impressive flight range.
Brushless Motors with PCB Wire Board
Featuring the latest Unibell SE0702 brushless motors, the Mobeetle6 provides superior power and efficiency. The motors have a configuration of 9N12P, stator diameter of 7mm, stator length of 2mm, and shaft diameter of Φ1mm. These attributes, along with the onboard pcb wire board, enable an overall smooth and reliable flight experience.
Built-in OPENVTX up to 400mw
The built-in 5.8G OPENVTX supports up to 400mw of transmitting power, featuring 48 channels and adjustable power for the perfect flight experience. The drone is equipped with a 5V 1A BEC, enabling efficient power distribution throughout the system. The onboard OPENVTX firmware is compatible with Smartaudio v2.1, further enhancing performance.
Quality Image with Runcam Nano3
The Mobeetle6 incorporates a Runcam Nano3 camera, providing crisp and clear imaging, whether in daylight or low light conditions. With an 800TVL horizontal resolution, 1/3" CMOS image sensor, and 2.3mm FOV 140° lens, this camera offers both stunning visuals and seamless flight control.
Package Inclusions:
- 1x 65mm Whoop Frame (Mobula6 frame)
- 1x 65mm Toothpick Frame (Mobeetle6 frame)
- Option1: DiamondF4 ELRS built-in SPI ELRS receiver
- Option2: DiamondF4 FR built-in SPI FRSKY receiver
- 4x SE0702 KV23000 Unibell brushless motor
- 1xGemfan 1210 31mm propeller(4cw+4ccw)
- 1x Runcam Nano3
- 1x Built-in 5.8G 48ch 25mw-400mw OPENVTX
- 2x 1s 300mah Lipo battery
- 1x Mobula6 canopy
- 1x Propeller disassemble tool
- 1x Screwdriver
Experience the power, versatility, and performance of the Mobeetle6 Whoop and Toothpick 2-IN-1 FPV Racer Drone by HappyModel. Order yours today and take your drone racing to new heights!
Product Specifications
Motor |
Mode:SE0702 KV23000
Configu-ration:9N12P
Stator Diamter:7mm
Stator Length:2mm
Shaft Diameter:Φ1mm
Motor Dimension(Dia.*Len):Φ9.5mm*14mm
Weight(g):1.5g
No.of Cells(Lipo):1S only |
Propeller |
Weight:0.19g
Material:PC
Pitch:1 inch
Props Dia:30mm
Center Hole Dia:1mm
|
Flight controller |
(ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280
(Frsky SPI RX version) DiamondF4 FR FC Firmware target: CrazybeeF4FR
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)
Original whoop size compatible
Power supply: 1S battery input (DC 2.9V-4.35V)
Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Betaflight OSD(SPI Control)
Built-in 5.8G OPEN VTX
Built-in SPI ELRS V2.0/Frsky receiver
Built-in 5V 1A BEC
|
Onboard 4in1 ESC |
MCU upgraded to EFM8BB21
Power supply: 1S LiPo/LiPo HV
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: O_H_50_REV16_8.HEX
Default protocol: DSHOT600
|
Onboard SPI ExpressLRS 2.4GHz Receiver |
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : Enameled copper wire antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Compatible with ExpressLRS V2.0 TX Module
Couldn’t flash separately ExpressLRS firmware |
Onboard Frsky SPI D8 receiver Version |
SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 model
Channels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m
|
Onboard 5.8g OPENVTX |
Firmware version: OPENVTX
Smartaudio v2.1
PIT Mode support
RCE Mode support
Channels:48ch
Transmitting Power: 0/RCE/25mw/100mw/400mw
Power supply: DC 5V
Current (5v): <650ma (400mw) |
Runcam Nano3 |
Model: RunCam Nano 3
Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.3mm(M6.5) FOV 140°
Signal System: NTSC
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V 120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm
|
Lipo Battery |
Capacity:300mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5g
Connector: PH2.0
|
Product Images
