The Ultimate FPV Racing Mini-Drone: Bassline HD Toothpick Drone
Introducing the all-new Bassline HD Toothpick Drone, a 90mm 2S 2-inch toothpick FPV racing drone that is perfect for high-speed flights and thrilling races. Equipped with a powerful EX1103 KV11000 motor and supporting various battery types, this drone provides an adrenaline-filled flight experience with unprecedented convenience. Immerse yourself in stunning video feed with the HD Digital VTX system and Walksnail or HDZERO options.
Key Features
- HD Digital VTX system for superior video transmission
- Available options: Walksnail HD or HDZERO
- SPI ELRS or UART ELRS receiver options
- Powerful EX1103 KV11000 motors for high-speed flight
- Compatible with 2S 450mah/550mah/650mah batteries (not included)
- Battery tray size: 17mm wide and 13mm high compatibility
Specifications
Brand: Happymodel
Model: Bassline HD
Item Name: 90mm 2S 2 Inch Toothpich FPV Racing Drone
Wheelbase: 90mm
Optional Version: HDZero Version (HDZero Whoop Lite and nano lite) / Walksnail Version (Walksnail Avatar HD mini 1s lite kit)
Optional Receiver: 2.4G ELRS SPI / 2.4G UART ELRS
Size: 115mm*115mm*40mm
Motor Specifications
Mode: EX1103 11000KV
Configuration: 9N12P
Stator Diameter: 11mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
Weight(g): 3.8g
No.of Cells(Lipo): 1-2S
Propeller Information
Model: Gemfan toothpick 2023 tri-blade
Weight: 0.88g
Material: PC
Pitch: 2.3inch
Props Dia: 52.17mm
Center Thickness: 5mm
Center Hole Dia: 1.5mm
X12 Lite AIO Flight Controller (2.4G ELRS SPI Receiver Version)
HDZero Version (HDZero Nano Lite Camera + HDZero Whoop Lite VTX)
WalkSnail Version (Walksnail Avatar HD mini 1s lite kit)
Package Included
- 1x Happymodel Bassline HD 2S Toothpick
- 1x Canopy for 14mmx14mm camera
- 1x Screw driver
Product Specifications
| Motor |
Mode: EX1103 11000KV
Configu-ration: 9N12P
Stator Diamter: 11mm
Stator Length: 3mm
Shaft Diameter: Φ1.5mm
Motor Dimension(Dia.*Len): Φ13.5mm*15.5mm
Weight(g): 3.8g
No.of Cells(Lipo): 1-2S
|
| Propeller |
Model: Gemfan toothpick 2023 tri-blade
Weight:0.88g
Material: PC
Pitch:2.3inch
Props Dia:52.17mm
Center Thickness:5mm
Center Hole Dia:1.5mm
|
|
X12 Lite AIO Flight Controller
(2.4G ELRS SPI Receiver Version)
|
Model: X12 Lite AIO;
Target: CRAZYBEEF4SX1280
Item Name: X12 Lite AIO FC built-in SPI ELRS 2.4G receiver and Onboard 12A 4in1 ESC
MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: BMI270 orICM42688P(SPI connection)
Power supply:2S 6.5v~8.7v
Built-in Betaflight OSD(SPI Control)
Built-in 12A(each) Blheli_S 4in1 ESC
Built-in voltage detection
Built-in current sensor
Onboard 12A 4in1 ESC
Power supply: 1-2S LiPo/LiPo HV
Current: 12A continuous ; peak 15A (3 seconds)
Support BLHeliSuite programmable
Default Factory firmware: Bluejay 0.16
Firmware target:Z_H_30_48_v0.16
Default protocol: DSHOT300
Onboard SPI ExpressLRS 2.4GHz Receiver
Packet Rate option: 50Hz/150Hz/250Hz/500Hz
ExpressLRS Firmware version: V2.0
RF Frequency: 2.4GHz
Antenna : SMD antenna
Telemetry output Power: <12dBm
Receiver protocol: SPI ExpressLRS
Default Compatible with ExpressLRS V2.0 TX Module
Couldn't flash separately ExpressLRS firmware
Could flash FC firmware to support ExpressLRS v3.0 TX module
|
|
CrazyF411 ELRS Flight Controller
( UART ELRS 2.4G receiver Version)
|
Item Name: CrazyF411 ELRS flight controller built-in UART ELRS 2.4G receiver
Target: CRAZYBEEF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor:BMI270 orICM42688P(SPI connection)
Power supply:2S 6.5v~8.7v
Built-in 20A(each)Blheli_S 4in1 ESC
Built-in Betaflight OSD(SPI Control)
Built-in 2.4G UART ExpressLRS Receiver
Built-in voltage detection
Built-in current sensor
Onboard 20A 4in1 ESC
MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Currents: 20A continuous peak 25A (5 seconds)
Support BLHeliSuite programmable
Default Factory firmware: Bluejay 0.18
Firmware target: F_H_40_48_v0.18
Default protocol: DSHOT300
Onboard UART ELRS 2.4G Receiver Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz
RF Frequency: 2.4GHz
Antenna plug: IPEX
Telemetry output Power: <12dBm
Receiver protocol: CRSF
Default firmware version: ExpressLRS V3.0.1
|
|
HDZero Version
( HDZero Nano Lite Camera +HDZero Whoop Lite VTX)
|
HDZero Nano Lite Camera
Size: 14x16x11 mm
Weight: 1.5gram
0.5 inch, up to 10650 mV/Lux-sec ultra-high sensitive CMos sensor
Excellent low light performance
Fov: 4:3: D:130° H:108° v:84°; 16:9:D:122° H:108° V:65°
HDZero Whoop Lite VTX
1-3S Input
25mW/200mW RF Output-SmartAudio Support
25.5x25.5 M2 Soft Mounting- Antenna Retention
Removable Shielding Box- 32.5x32.5mm(29x29mm inner)
4.5grams/4mm Thickness (without shielding)
|
|
WalkSnail Version
(Walksnail Avatar HD mini 1s lite kit)
|
Avatar lite camera
Image Sensor: 1/2.7”1nch
Resolution: 1080P/60fps,720P/120fps,720P/60fps
Ratio: 16/9 4/3
Lens: 2.1mm
FOV: 170°
Aperture: F2.0
Shutter Rolling: Rolling shutter
Min.Illumination:0.001Lux
Weight: 1.8g
Dimensions: 14*14*16mm
Avatar mini 1s VTX
Communication Frequency: 5.725-5.850GHz
Transmitter Power (EIRP) FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm
MIC:<25dBm
I/O Interface JST1.0*6(Power in)JST0.8*4(USB)
Mounting Holes 25.5*25.5mm
Dimensions 30*30*6.5mm
Storage 8G
Recording 1080p/720p
Weight 5.1g
Operating Temperature -20-40℃
Channels 8
Wide Power Input 3.1V-5V
Supported FC System Betaflight
OSD Canvas mode
Bitrate 25mbps 50mbps
Latency Average delay 22ms
Antenna IPEX
|
Product Images
